Best settings for Plotting with Threadripper Pro 3975wx

Hi guys,

i m new in chia minning.

can anyone tell my the best plotting setup for the above machine?

Ryzen Threadripper PRO 3975WX 32 cores (with Cooler Master MasterLiquid ML360)

ASUS WRX80E-SAGE SE WIFI AMD WRX80 Socket SP3 Extended ATX

2 x G.Skill Ripjaws V 64GB DDR4-3200MHz2 x G.Skill Ripjaws V 64GB DDR4-3200MHz

2 x Corsair MP600 PRO M.2 1000 GB PCI Express 4.0 3D TLC NAND (for OS)

4 x Corsair MP600 PRO M.2 2000 GB PCI Express 4.0 3D TLC NAND NVMe (for plotting)

6 x 8 TB Seagate Iron Wolf

Just by 6 x 64 GB Samsung RDIMM 3200 Mhz and you are fine. Then do 3x Madmax parallel. 20 min stagger.

i ll, but not right now.
How can i use it now.
can you send me the correct setup for the madmax?

Return 3 of the 2TB SSDs and one of the 1 TB SSD and buy RAM instead.

ok. for now can you tell me with this setup. i cant return them. is in use.
the x Corsair MP600 PRO M.2 2000 is in raid 0. After research, i have found that is better like this.

No clue because with that setup u wanna use a randisk. Overwise you should have bought a cheaper and faster regular Threadripper.

Suggestion: Put all 4 2TB drives in Raid 0 and use them as tmp drive. Play around with thread number und buckets and find out yourself what the ideal parallel number of plots is.

Btw I can also tell you that with that ram modules, you wont be able to use 8 of them. Tried that, failed, using Samsung 64 GB RDIMM modules now.