Hi!
Is this the glorious sound before die?
When start a smartctl test, this is the sound of the HDD. Also, dont know how to explain, but it “kicks” the shelf, a “bamm” when an IO occurs.
Its a WD Desktop 16 TB.
Thanks!
Edit #1
SMART
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0004 131 131 054 Old_age Offline - 116
3 Spin_Up_Time 0x0007 083 083 001 Pre-fail Always - 363 (Average 313)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 12
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
8 Seek_Time_Performance 0x0004 140 140 020 Old_age Offline - 15
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 742
10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 43
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 43
194 Temperature_Celsius 0x0002 030 030 000 Old_age Always - 46 (Min/Max 24/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0