i just restarted the computer and yes everything looks ok
nice!
now also quit GUI on the harvester machine to stop chia processes, just to be sure reboot that machine and on harvester machine please apply the necessary terminal command. no more need for the gui on that machine is its working harvester-only.
also because you already installed ssh-server on the full-node no need to do that again.
You can leave the full-node machine in peace for now;-)
1 Like
okay i did this…and rebooted now.
so i should go on the harvester machin now and do all the commands… as before ?
yes sir! all on the harvester, when configured correctly it will report to the full-node and start doing its thing. no actions on the full node necessary.
just curious, do you have some plots on the harvester machine already?
okay nice… just give me 2 min. and i will do all the commmands on the harvester machin… yes i have plots ready 
few questions first:
what is the ip address of the full-node machine?
what is the ip address of the harvester machine?
what is the username on the full-node machine?
and… what is the username on the harvester machine?
last but not least, don’t copy paste the comment sections of the commands #
1 Like
fullnote machine ip 192.168.8.150 and username is milo
harvester machine ip 192.168.8.131 and username is milo1
yep!
then on the harvester machine:
`sudo scp milo@192.168.8.150:~/.chia/mainnet/config/ssl/ca/* /ca_temp_dir`
you could be asked for password twice.
first from sudo command, user milo1 needs password milo1
then from full-node machine answerring the scp command: user milo want its password
1 Like
i thinks its good now
192.168.8.150
you want the harvester on the harvester-machine to report to the farmer on full-node machine!
1 Like
okay done… should i go on the full node machine now ?
did you ‘./chia start harvester -r’ as final command after all others without errors?
then go to full node machine and check in GUI Farm section if both harvesters (local on full node ánd on harvester machine) show up with plots passed filters on latest challenges.
Like this, but only three remote harvesters
1 Like
yes i did everyhing and no errors
so when i open the chia gui on the full node machine… i see a increase in the plot and size… but there as like 90 tb. missing 
It will take a few minutes for the harvester to load its plots and report them to the full node
1 Like