HELP WITH CONFIG FOR 5900x

Chia Tools & Scripts
1

Need some help with swar config guys…
Ryzen 5900x
48gb RAM
4x 1TB ssd 980pro (no raid)
5 different plot stores

2

I get about 22 plots according to plot status but I`ll see tonight.

5900x
2x2 TB Sabrent Nvme
64GB 3200 Ram
2 Diffrent Storage

3

Reduce your stagger between jobs just low enough to avoid bottle neck copying to final destination drive. If you have 60min delay you’ll limit yourself to 24/day.

I’m getting 43/day with almost the exact same setup.

4

Can you show us your config and pc setup please?

5

I am almost exactly like your setup from your first post

Who are you asking for config and PC setup?

I am on PCIE4 does that matter?

6

Would you please share you’re plotting configuration?

7

I get around 40 plots a day with the exact same setup, 2x16Gb of 3200 RAM. 4x 980 pro 1 Tb, Gigabbyte X570 Aorus pro motherboard.

k: 32
e: False             # Use -e plotting option
n_threads: 4         # Threads per job
n_buckets: 128       # Number of buckets to split data into
job_buffer: 3389     # Per job memory

tmpdir_stagger_phase_major: 1
tmpdir_stagger_phase_minor: 5
# Optional: default is 1
tmpdir_stagger_phase_limit: 1

# Don't run more than this many jobs at a time on a single temp dir.
tmpdir_max_jobs: 4

# Don't run more than this many jobs at a time in total.
global_max_jobs: 16

# Don't run any jobs (across all temp dirs) more often than this, in minutes.
global_stagger_m: 30

# How often the daemon wakes to consider starting a new plot job, in seconds.
polling_time_s: 5

But I also get a similar performance with

tmpdir_stagger_phase_major: 1
tmpdir_stagger_phase_minor: 7
# Optional: default is 1
tmpdir_stagger_phase_limit: 1

# Don't run more than this many jobs at a time on a single temp dir.
tmpdir_max_jobs: 3

# Don't run more than this many jobs at a time in total.
global_max_jobs: 12

# Don't run any jobs (across all temp dirs) more often than this, in minutes.
global_stagger_m: 30

# How often the daemon wakes to consider starting a new plot job, in seconds.
polling_time_s: 5

Which is better I think since time per plot is much shorter so in case something crashes you don’t waste too much time.

8

5900x OC to 4.65 all cores
64GB 3200
2x 2TB Inland Platinum RAID 0
Intel S3500 1.6TB 2nd Temp
Ubuntu 20.04

Here is my config

    size: 32
    bitfield: true
    threads: 3
    buckets: 128
    memory_buffer: 4200
    max_concurrent: 11
    max_concurrent_with_start_early: 12
    initial_delay_minutes: 0
    stagger_minutes: 15
    max_for_phase_1: 5
    concurrency_start_early_phase: 5
    concurrency_start_early_phase_delay: 0
9

Are overclocking and RAID 0 worth it? I am getting 41 without them, but I am not sure that the difference is due to that.

10

what is your config ?

11

It is mentioned in my other answer. Also 5900X