I am using Swars plot Manager,
I have the Equipment and scale, but I just want to get some help around the editing the config to have more than 1 Final Dir, also tweaking the config Temp Dir is 1.8 TB WD black 850 512GB which is raided via Asus hyper 4.0 extender card raid 0, Second Temp Seagate Firecuda 520 X 4 Raid 0 2 drives installed into Dimm 2 extender on the Asus Zenith 2 board and 2 drives installed in Nvme slot 1 and 2 and configured as raid 0, The problem with the Seagate Firecuda drives is the mass slow down due to the TLC flash causing a massive drop in sustained read/write speeds, WD blacks are 4 times faster under load so preferred 1st temp.
I also am plotting with 2 computers Ryzen 9 with X 570 but less of an issue.
- name: max_plots: 999 farmer_public_key: pool_public_key: temporary_directory: D:\ temporary2_directory: E:\ destination_directory: F:\ size: 32 bitfield: true threads: 4 buckets: 128 memory_buffer: 3412 max_concurrent: 31 max_concurrent_with_start_early: 31 stagger_minutes: 7 max_for_phase_1: 6 concurrency_start_early_phase: 4 concurrency_start_early_phase_delay: 0 temporary2_destination_sync: false
CPU: AMD Threadripper 48 Threads
RAM: 98GB 3200 Corsair LPX
Board ASUS Zenthith2 Extreme Alpha
Asus Hyper 4.0 Expansion PCIE Card 4 X WD black 850 512GB RAID 0 1.8 TB
4 X Seagate 520 Raid 0 3.6TB Raid 0
1200 Watt Corsair PWR Supply
1st Final Directory 4 X 1TB Crucial p1 Raid 0 ( Using to reduce Phase 5 bottle neck current speed to transfer to drive 5.3 mins per plot, hence the 7 min stagger)
2nd Final Dir Seagate 8 TB 7200
3rd Final Dir Seagate 8 TB 7200
Dell Power Edge R730 128GB
MD1400 Storage array 167 TB, adding MD 1400 as required.
any help would be appreciated