Hi, how do I know if the temp2 drive I have allocated in Swar config is actually being used as it never moves from 0% however the temp2 column is populated.
**============================================================================================================================** **num job k plot_id pid start elapsed_time phase phase_times progress temp_size** **============================================================================================================================** **1 P4608-0 32 af73f32 113949 2021-06-04 02:41:06 05:30:39 3 02:09 / 01:14 91.53% 141 GiB ** **2 P4608-0 32 faaad09 115195 2021-06-04 05:11:17 03:00:28 2 02:12 47.64% 195 GiB ** **3 P4608-0 32 89bd937 115863 2021-06-04 06:29:23 01:42:23 1 25.35% 167 GiB ** **4 P4608-0 32 89b54d5 126033 2021-06-04 07:25:28 00:46:18 1 13.59% 146 GiB ** **============================================================================================================================** **Manager Status: Running** **====================================================================================** ** type drive used total % # temp temp2 dest** **====================================================================================** **t/-/- /mnt/nvme0n1 0.72TiB 2.86TiB 26.6% 4/-/- 1/2/3/4 ** **t/-/- /mnt/nvme1 0.46TiB 0.89TiB 54.7% -/-/- ** **t/-/- /mnt/nvme2 0.00TiB 0.89TiB 0.0% -/-/- ** **-/2/- /mnt/nvme1n1 0.00TiB 2.86TiB 0.0% -/-/- ** **-/-/d /mnt/plot_2 1.98TiB 2.69TiB 77.7% -/1/1 2 2 ** **-/-/d /mnt/plot_3 1.29TiB 7.22TiB 18.8% -/1/1 3 3 ** **-/-/d /mnt/plot_4 0.92TiB 7.22TiB 13.5% -/2/2 1/4 1/4 ** **====================================================================================**