Can anyone explain the orphan stat to me?
Are these my orphans that are listed, or general network orphans?
Should I be concerned about them?
Are others getting them even with good response times?
TIA.
Edit.
From my understanding, they will only affect who the tx fees go to, so no big deal, they wouldnāt affect block rewards other than fees, am I correct?
Hi, running fullnode on windows and I have a bunch of drives connected as mount points to get around the 26 drive letter limit of windows. However, it seems on farmer.net, it only shows the drives with an assigned drive letter. Is that expected behavior? Farmr sees my total plots, including those on the drives connected via the mount points, so Iām confused. Thanks!
Yes, strange. As to why, open ?? This is what I see in farmr in Windows 10 when you scroll down to see drives list:
Might be a bit confusing, but this is on C: drive, under dir ChiaDrives, then XXTB-E or XXTB-I for external or internal, followed by drive brand and number.
Thanksā¦although Iām not sure I understand. For example, on my dashboard, it shows my c:\ drive which as no plots on it.
Hi, on farmr.net it shows my average response time as being 1 sec which seems a bit high. Is that acceptable or is there some troubleshooting I need to do. It also says I have 0 missed challenges, and 0 pool and harvester errors so everything seems to be working?
Lastly, does anyone know over what period of time that average response time stat is calculated? Is it since the full node was started or last 10 minutes or something else?
Thank you!
Not sure what you are looking at, I do not have āC:ā on my farmr anywhere. Where is your directory you assign drives to? My only mentions of āC:ā alone are in relation to the mount point for all other drives. Are you scrolling down to see drives? Should be down where you see this ā¦
I see this and consider it good. Nothing to do here, everything is normal. This is combined from a local PC and a LAN storage node, so the 1-5 sec responses are mostly from that net point.
Last 24 hours: 71030 plots passed 9218 filters
Each plot passed 1.00 times per 512 filters
24h Efficiency: 100%
Longest response: 2.41228 seconds
Shortest response: 0.3283 seconds
Median: 0.841s Avg: 0.864s Ļ: 0.328s
0.25-0.5s: 1344 filters (14.6%)
0.5-1.0s: 4977 filters (54.0%)
1.0-5.0s: 2897 filters (31.4%)
On mine, the mount points are not listedā¦just the lettered drives. In addition, on mine, it also lists c: which has no plots.
Well, the mount points are where you navigate to and tell the Chia GUI the plots are, so thereās that. Do u have a screenshot of your farmr GUIās panel, as I did, showing where youāve set them?? And you can check you debug.yaml as well.
Could it be that C: drive is added as a plot directory in chiaās config.yaml?
@hammer @Bones you can link harvesters without linking a full node, but you will miss some useful stats
Have you noticed that China is always on the top of the list on Connections??
Could it be showing up as c: because thatās where the mount point folders are located?
Yes I have, and the China central party is the ones banning crypto activities. Naughty citizens.
My main node keeps throwing an error after apx 24 hrs I think.
Assumed I needed to update but Iām on 1.7.6.13 which I believe is the latest.
It still all works, but the node window says it canāt decode something or other.
But your server keeps getting updates, so it seems to work.
Iāll post more details the next time it happens, as I donāt exactly remember what it said, and Iām a few beers in after work.
I believe it said it couldnāt decode the log file.
After a restart its fine again though.
Some new behavior on my farmr as well.
Couple days in a row, when I check in the morning, the DOS window says my code isnāt connected and to press enter to exit. I do, it exits, but then I restart farmr and itās appears to work normally. Meanwhile the GUI panel stays up, but is not updated until the restart and perhaps 10-15 min has passed.
So my code is connected but something else is going on to cause the DOS window to disconnect.
Hi, question on the number of plots shown under Efficiency in the dashboard and what it meansā¦mine says 72000 plots. What does that mean? Thanks!
Pls list the exact line your referring to.
Efficiency is listed as a % not a number.
I assume your actually asking about line that is " last 24 hours" ?
Oh, sorry, i see it, I look at the legacy tab not that tab as it shows more details.
That number is how many times your plots were checked to pass filters in 24 hrs.
